MS25224H
Inches |
mm |
Inches |
mm |
Inches |
mm |
.003 |
.08 |
.156 |
3.96 |
.840 |
21.34 |
.005 |
.13 |
.188 |
4.77 |
.875 |
22.22 |
.008 |
.20 |
.240 |
6.10 |
.906 |
23.01 |
.016 |
.41 |
.248 |
6.30 |
1.062 |
26.97 |
.031 |
.79 |
.320 |
8.13 |
1.093 |
27.76 |
.032 |
.81 |
.469 |
11.91 |
1.547 |
39.29 |
.050 |
1.27 |
.475 |
12.06 |
1.635 |
41.53 |
.062 |
1.57 |
.516 |
13.11 |
1.812 |
46.02 |
.081 |
2.06 |
.688 |
17.47 |
1.830 |
46.48 |
.094 |
2.39 |
.719 |
18.26 |
2.125 |
53.98 |
.096 |
2.44 |
.750 |
19.05 |
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specifies, tolerances are ± .016 on decimals.
3. For design feature purposed, this standard takes precedence over procurement documents referenced herein.
4. Referenced documents shall be of the issue in effect on date of invitations for bid.
5. Material: Plastic molded, red, number 11136, FED-STD- 595. Steel, commercial, shall be smooth and free from burrs.
6. Finish: Zinc plate, ASTM B 633 , type III, or cadmium plate, SAE-AMS-QQ-P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless,
color number 37038 or semigloss, color number 27038, FED-STD- 595 or equivalent.
REQUIREMENTS
Guard shall remain in either the open or closed position
Opening the guard shall not change position of the switch contacts. Toggle switch shown in position A.
Closing the guard shall place the toggle in position A.
Referenced documents
MIL-DTL-7703
SAE-AMS-QQ-P-416
DOD-P-15328D ASTM-B-633
MIL-C-8514
FED-STD-595
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business