MS25223H
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specifies, Tolerances are ± .016 on decimals.
3. For design feature purposed, this standard takes precedence over procurement documents referenced herein.
4. Referenced documents shall be of the issue in effect on date of invitations for bid.
5. Finish: Zinc plate, ASTM B 633, type III, or cadmium plate, SAE-AMS-QQ-P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, color number 37038 or semi-gloss, color number 27038, FED-STD-595 or equivalent.
6. Material: Plastic, molded, red color shade 11136, FED-STD- 595. Steel, commercial, shall be smooth and free from burrs.
REQUIREMENTS
Opening the guard shall not move the switch contacts.
Closing the guard shall place the switch lever in the center position from closing the guard shall place the switch lever in the center position from either the up or down position.
Referenced documents
MIL-DTL-7703
MIL-C-8514
ASTMB 633
SAE-AMS-QQ-P-416
DOD-P-15328
FED-STD-595
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing activity
Army - CR DLA -CC
Navy - AS (Project 5930-2005-008) Air Force - 11
DLA - CC
Review activities: Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil/.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business