MS25221G
Inches .003 |
mm .08 |
Inches .328 |
mm 8.33 |
|
.005 |
.13 |
.500 |
12.70 |
|
.008 |
.20 |
.516 |
13.11 |
|
.016 |
.41 |
.656 |
16.66 |
|
.062 |
1.57 |
.719 |
18.29 |
|
.125 |
3.18 |
.875 |
22.22 |
|
.156 |
3.96 |
.906 |
23.01 |
|
.188 |
4.77 |
2.125 |
53.98 |
|
NOTES: |
1. Dimensions are in inches.
2. Unless otherwise specifies, tolerances are ± .016 on decimals.
3. This standard takes precedence over documents referenced herein.
4. Finish: Zinc plate, ASTM B 633, type III, or cadmium plate, SAE-AMS-QQ-416 type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, color number 37038 or semigloss, color number 27068, FED-STD-595 or equivalent
5. Material: Steel, commercial, .032 ± .008, shall be smooth and free from burrs
6. Reference documents shall be of the issue in effect on date of invitation for bid.
FIGURE 1.Dimensions and configuration -Continued
Referenced documents
MIL-DTL-7703
MIL-C-8514
DOD-P-15328
ASTMB 633
SAE-AMS-QQ-P-416
FED-STD-595
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: |
Preparing activity |
Army -CR |
DLA -CC |
Navy - AS |
(Project 5930-2005-009) |
Air Force - 11 |
|
DLA - CC |
Review activities: Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil/.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business