MS25214G
DASH NO. |
OPEN FORCE |
TYPE |
PANEL THICKNESS (REF) |
REMARKS |
-1 1/ |
1.0 to 2.5 LBS |
3- HOLE MOUNTING |
.050 TO .081 |
|
-2 |
1- HOLE MOUNTING |
.050 To .248 |
||
-3 |
IDENTICAL TO -2, EXCEPT KEYWAY IS ROTATED 180° |
1/ Inactive for new design, use for replacement only.
FIGURE 1.Dimensions and configuration Continued
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerances are ± .016 on decimals.
3. Material: Plastic, molded, FED-STD-595/11136. Steel, commercial, shall be smooth and free from burrs.
4. Finish: Zinc plate, ASTM-B633 , type III, or cadmium plate, SAE-AMS-QQ-P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, FED-STD-595/37038 or semi gloss, FED-STD-595/27038 or equivalent.
5. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
REQUIREMENTS
Opening the guard shall not move the switch contacts. The guard shall remain in either open or closed position.
Closing the guard shall move the switch lever to the center position from either the up or down position.
Referenced documents shall be of the issue in effect on date of invitations for bid.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business