MS25126 Switches, Toggle, Unsealed And Sealed Toggle General Specification For

Pages 1 - 2 - 3 - 4

MS25126L

REQUIREMENTS:

Superseding No.	Superseded No.
MS25126-A1	MS25126-1
MS25126-B1	MS25126-2
MS25126-C1	MS25126-3
MS25126-D1	MS25126-5
MS25126-E1	MS25126-7
MS25126-C3	MS25126-4
MS25126-E3	MS25126-8
MS25126-J4	MS25126-9
MS25126-MII	MS25126-6

The superseding dash numbers supersede and are interchangeable with the superseded dash numbers.

Example of Part No. MS25126-B1-On off on, toggle seal, locked in center off position.

All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever.

Locking Arrangement: Positive locking shall be accomplished and shall prevent motion of the toggle lever until the locking mechanism is manually released.

The force required to release the locking mechanism shall be 3 to 5 pounds. Maximum weight is 0.15 pound.

Referenced documents shall be of the issue in effect on the date of invitation for bid.

Electrical Endurance: 10,000 Cycles. Mechanical Endurance: 20,000 Cycles

Electrical rating: See table I

Table I Detail Requirement

MS part No.	Former Ms Part No.	Circuit with Toggle Lever In			Current Capacity (Amperes Per Pole)
					28 VDC			115 VAC 400 Hertz
		Opposite keying side	Center	Keying side	Lamp- load Circuit	Resistive circuit	Inductive Circuit	Lamp- load Circuit	Resistive circuit	Inductive Circuit
MS25126-1	A,B,C,D,E	On	Off	On	7	20	15	4	20	15
MS25126 -2	C,E		None	Off
MS25126-3				On
MS25126-4	B,J		Off	None
MS25126-5	L		Mom. Off
MS25126-6			None	Mom. On	5	18	10	2	11	8
MS25126-7	F,H	Mom-On	Off
MS25126-8	K	None
MS25126 -9	L	On	None	Mom. Off	7	20	15	4	20	15
MS25126 -10		Off		Mom. On	5	18	10	2	11	8
MS25126 -11	G,K,M,N	On	Off