MS25125L
REQUIREMENTS:
All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever.
Locking arrangement: Positive locking shall be accomplished and shall prevent motion of the toggle lever until the locking mechanism is manually released.
The force required to release the locking mechanism shall be 3 to 5 pounds. Electrical Endurance: 10,000 Cycles.
Mechanical Endurance: 20,000 Cycles.
Electrical Rating: See table I.
Maximum weight is .10 lb.
Referenced document shall be of the issue in effect on the date of invitation for bid.
Superseding No. |
Superseded No. |
MS25125-A1 |
MS25125-1 |
MS25125-B1 |
MS25125-2 |
MS25125-C1 |
MS25125-3 |
MS25125-D1 |
MS25125-5 |
MS25125-E1 |
MS25125-7 |
MS25125-C3 |
MS25125-4 |
MS25125-E3 |
MS25125-8 |
MS25125-J4 |
MS25125-9 |
MS25125-MII |
MS25125-6 |
The superseding dash numbers supersede and are interchangeable with the superseded dash numbers.
Table I: Detail Requirement
|
MS Part NO. |
Locking Combination |
Circuit with toggle lever in |
Current Capacity (Amperes) |
|||||||
28 Volts Direct Current |
115 Volts Alternating Current |
|||||||||
Opposite keying side |
Center |
Keying side |
Lamp- Load Circuit |
Resistive Circuit |
Inductive Circuit |
Lamp- Load Circuit |
Resistive Circuit |
Inductive Circuit |
||
MS25125-1 |
A,B,C,D, E |
On |
Off |
On |
5 |
20 |
15 |
3 |
10 |
10 |
MS25125-2 |
C,E |
None |
Off |
|||||||
MS25125-3 |
On |
|||||||||
MS25125-4 |
B,J |
Off |
None |
|||||||
MS25125-5 |
L |
Mom- Off |
||||||||
MS25125-6 |
None |
Mom-On |
4 |
15 |
10 |
2 |
10 |
7 |
||
MS25125-7 |
F,H |
Mom-On |
Off |
|||||||
MS25125-8 |
K |
None |
||||||||
MS25125-9 |
L |
On |
None |
Mom- Off |
5 |
20 |
15 |
3 |
10 |
10 |
MS25125-10 |
Off |
Mom-On |
4 |
15 |
10 |
2 |
10 |
7 |
||
MS25125-11 |
G,K,M,N |
On |
Off |
|||||||
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business