MS25098K
Design and construction: See figure 1.
Switching characteristics: See table I. Direction of the movement of the switch mechanism is the same as that of the toggle lever.
Weight: .8 ounce maximum.
Dielectric withstanding voltage: Sea level only. Toggle seal test: Applicable.
Electrical endurance:
Maintained circuits: 20,000 cycles
Momentary circuits: 10,000 cycles. Resistive loads:
125 V dc; 3 amperes.
115 V ac, 60 Hz: 3 amperes. Inductive loads:
125 V dc: 1.5 amperes.
115 V ac, 60 Hz: 1.5 amperes. Group B inspection: Not applicable.
Part or Identifying Number (PIN):
Example:
Dash number
(see table I)
MS25098-22
PIN MS25098-22 identifies a switch with a circuit configuration of OFF in the down position (keying side), NONE in center position, and ON in the up position.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business