MS25034K
Inches .003 |
mm .08 |
Inches .093 |
mm 2.36 |
Inches .688 |
mm 17.47 |
|
.005 |
.13 |
.094 |
2.39 |
.719 |
18.26 |
|
.006 |
.15 |
.096 |
2.44 |
.750 |
19.05 |
|
.008 |
.20 |
.156 |
3.96 |
.840 |
21.34 |
|
.010 |
.25 |
.240 |
6.10 |
.875 |
22.22 |
|
.016 |
.41 |
.248 |
6.30 |
.906 |
23.01 |
|
.030 |
.76 |
.272 |
6.91 |
1.062 |
26.97 |
|
.031 |
.79 |
.469 |
11.91 |
1.562 |
39.67 |
|
.032 |
.81 |
.475 |
12.06 |
1.635 |
41.53 |
|
.050 |
1.27 |
.516 |
13.11 |
1.812 |
46.02 |
|
.062 |
1.57 |
.625 |
15.88 |
2.150 |
54.61 |
|
.081 |
2.06 |
|||||
NOTES: |
1. Dimensions are inches.
2. Unless otherwise specifies, Tolerances are ± .016 on decimals.
3. Material: Steel, commercial, shall be smooth and free from burrs.
4. Finish: Zinc plate, ASTM B 633, type III, or cadmium plate, SAE-AMS-QQ-P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, color number 37038 or semigloss, color number 27038, FED-STD- 595 or equivalent.
5. This standard takes precedence over documents referenced herein.
6. Referenced documents shall be of the issue in effect on date of invitations for bid.
REQUIREMENT
Guard shall remain in either the open or closed position.
Opening the guard shall not change position of the switch contacts.
When lever is in upward position, closing guard shall throw lever to the center position.
Normal operation of the toggle between the center and down positions shall be possible without having to lift the guard
Referenced documents
MIL-DTL-7703
MIL-C-8514
ASTM-B633
SAE-AMS-QQ-P-416
DOD-P-15328
FED-STD- 595
Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business