MS25002K
TABLE II. Detail requirements.
MS25002 |
Number of sections |
Torque (lb-in) |
Wt Lb Max |
A Dim |
|
Shock method I and II |
Min |
Max |
|||
-1 -2 -3 -4 -5 -6 |
1 2 3 4 5 6 |
2.0 3.0 3.5 4.0 4.0 4.0 |
5.0 6.0 7.0 8.0 9.0 10.5 |
.31 .37 .43 .50 .56 .62 |
1.18 1.57 1.94 2.31 2.69 3.06 |
TABLE III. Supersession table.
Superseding dash number |
Superseded dash number |
|
Shock method I and II |
Shock method 1 and II |
|
-1 -2 -3 -4 -5 -6 |
-12 -22 -32 -42 -52 -62 |
REQUIREMENTS:
For each additional section, add .375 (9.53 mm) ±.016 (0.41) to the 1.151 (29.24 mm) dimension.
Switch has continuous rotation with "OFF" and seven "ON" positions. The indexing arm, visible through the tapped holes, points to the terminal to which contact is being made. Rotation may be restricted by inserting screws in the rear stop plate cover. EXAMPLE: If indexing screws are inserted between terminals X1 and X8 and X3 and X4, as shown, while the indexing arm is at terminal X1, X2, or X3; rotation is restricted to provide an "OFF" position at X1 and "ON" positions at X2 and X3. Shaft is shown in the "OFF" position.
Threads in accordance with FED-STD-H-28, "Screw-Threads Standards for Federal Services."
"OFF" position of knob may be oriented as desired by positioning of mounting panel detent for engagement with locking ring bent tab.
Shock Method II is required for shipboard application.
For design feature purposes, this standard takes precedence over acquisition documents referenced herein. Referenced documents shall be of the issue in effect on date of invitations for bids, or request for proposal except
that referenced adopted industry documents shall give the date of the issue adopted.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business