MS24656R
TABLE I. Detail requirements. 71
MS dash no. |
Circuits made between terminals as indicated with the toggle lever in these positions: 11 |
Current capacity in amperes |
Life low current level switching 5 mV |
|||||||
Resistive load |
Inductive load |
|||||||||
28 V dc |
115 Volts |
28 V dc |
115 Volts |
|||||||
Opposite locking tab side |
Center position |
Locking tab side 41 |
60 Hz ac |
400 Hz ac |
60 Hz ac |
400 Hz ac |
||||
-211 |
2-3, 5-6 ON |
OFF |
1-2 4-5 ON |
5 |
2 |
3 |
21 1 |
1 |
2 |
31 25 µA |
-221 |
NONE |
OFF |
||||||||
-231 |
NONE |
1-2 4-5 ON |
||||||||
-241 |
OFF |
NONE |
||||||||
-271 |
MOM-ON 2-3, 5-6 |
MOM-ON 1-2, 4-5 |
||||||||
-281 |
NONE |
|||||||||
-311 |
ON 2-3, 5-6 |
|||||||||
-321 51 61 |
NONE |
2-3 5-6 ON |
1-2 4-5 MOM-ON |
|||||||
-331 51 61 |
2-3 5-6 ON |
2-3 4-5 ON |
1-2 4-5 ON |
|||||||
-341 51 61 |
2-3 5-6 MOM-ON |
2-3 4-5 ON |
1-2 4-5 MOM-ON |
|||||||
-351 51 61 |
2-3 5-6 ON |
2-3 4-5 ON |
1-2 4-5 MOM-ON |
|||||||
11 Direction of movement of internal mechanism is opposite to the direction of the toggle movement.
21 With time constant of .020 ± .002 seconds.
31 Contact resistance not to exceed 50 ohms during life, low current level switching.
41 Nonfunctional terminals shall not be supplied.
51 Dielectric withstanding voltage: 1,200 V rms at sea level (center on circuits).
61 Delayed action of the switch toggle lever may cause circuit to close or open before snap action mechanism trips.
51 For IWTS termination, MS number will be concluded by the letter W. Example Part or Identifying Number (PIN): MS24656-711, toggle sealed on-off-on, miniature, MS24656-771W, toggle sealed, on-off-on, miniature with IWTS
termination
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business