MS24525K
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.25 |
6.4 |
.008 |
0.20 |
.37 |
9.4 |
.012 |
0.30 |
.38 |
9.7 |
.02 |
0.5 |
.432 |
10.97 |
.03 |
0.8 |
.469 |
11.91 |
.060 |
1.52 |
.47 |
11.9 |
.076 |
1.93 |
.69 |
17.5 |
.130 |
3.30 |
1.10 |
27.9 |
.138 |
3.51 |
1.340 |
34.04 |
.240 |
6.10 |
1.370 |
34.80 |
1.660 |
42.16 |
NOTES:
1. Dimensions are inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .020 (0.51 mm) for two place decimals and ± .005 (0.13 mm) for three place decimals.
4. For hardware and terminal screw detail specifications, see appendix of MIL-DTL-3950.
5. In event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence.
FIGURE1. Dimensions and configuration Continued
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business