MS24523J
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.03 |
0.8 |
.240 |
6.10 |
.469 |
11.91 |
.91 |
23.1 |
.008 |
0.20 |
.060 |
1.52 |
.25 |
6.4 |
.47 |
11.9 |
1.18 |
30.0 |
.012 |
0.30 |
.076 |
1.93 |
.38 |
9.7 |
.635 |
16.13 |
1.270 |
32.26 |
.02 |
0.5 |
.138 |
3.51 |
.432 |
10.97 |
.69 |
17.5 |
NOTES:
1. Dimensions are inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .020 (0.51 mm) for two place decimals and ± .005 (0.13 mm) for three place decimals.
4. For hardware and terminal screw detail specifications, see appendix of MIL-DTL-3950.
5. In event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence.
FIGURE1. Dimensions and configuration Continued
REQUIREMENTS
All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever.
Maximum weight is .20 pound.
Thread length and hole depth should be such that screws will not bottom when tightened. Electrical rating: See table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business