MS24417 Guard, Switch, 2 Or 3 Position

Pages 1 - 2

MS24417K

	Inches .005	mm 0.13	Inches .328	mm 8.33
	.008	0.20	.475	12.06
	.016	0.41	.500	12.70
	.031	0.49	.656	16.66
	.032	0.81	.850	21.59
	.062	1.57	.875	22.22
	.125	3.18	.900	22.86
	.156	3.96	1.700	43.18
	.188	4.77	1.800	45.72
NOTE:

1. Dimensions are in inches.

2. Metric equivalents are given for general information only.

3. Unless otherwise specifies, tolerances are ± .016 on decimals.

4. This standard takes precedence over documents referenced herein.

5. Material: Steel, commercial, .032 ± .008, shall be smooth and free from burrs.

6. Finish : Zinc plate, ASTM B 633, type III, or cadmium plate, SAE-AMS-QQ-P-416, type III, with optional supplementary treatment per MIL-C-8514 or DOD-P-15328, black enamel, lusterless, color number 37038 or semi gloss, color number 27068, FED-STD- 595 or equivalent.

7. Reference documents shall be of the issue in effect on date of invitation for bid.

FIGURE 1. Dimensions and configuration Continued

Referenced documents

MIL-DTL-7703

ASTMB 633

SAE-AMS -QQ-P-416

FED-STD-595

MIL-C-8514

DOD-P-15328

Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

Custodians:	Preparing activity
Army - CR	DLA -CC
Navy - AS	(Project 5930-2005-006)
Air Force - 11
DLA - CC

Review activities: Air Force - 99

NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil/.