INCH-POUND MS21437H
5 October 2011
SUPERSEDING MS21437G
30 December 1994
DETAIL SPECIFICATION SHEET
SWITCH, TOGGLE, POSITIVE BREAK, LEVER LOCK, MINIATURE, TOGGLE SEALED,
SOLDER LUG, DOUBLE POLE, .469 MOUNTING BUSHING
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-8834.
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.002 |
0.05 |
.024 |
0.61 |
.052 |
1.32 |
.438 |
11.13 |
.003 |
0.08 |
.025 |
0.64 |
.072 |
1.83 |
.469 |
11.91 |
.005 |
0.13 |
.030 |
0.76 |
.169 |
4.29 |
.556 |
14.12 |
.010 |
0.25 |
.032 |
0.81 |
.338 |
8.59 |
.572 |
14.53 |
.012 |
0.30 |
.045 |
1.14 |
.430 |
10.92 |
.706 |
17.93 |
.016 |
0.41 |
.047 |
1.19 |
.432 |
10.97 |
1.102 |
27.99 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.010 for decimals and ±.5° for angles.
4. Design of switch case housing, terminals and barriers is optional provided that the specified dimensions are not exceeded.
5. For hardware detail specifications, see appendix of MIL-DTL-8834.
6. Nonfunctional terminals shall not be supplied.
FIGURE 1. Switches with .469 inch mounting bushing.
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business