DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, POSITIVE BREAK,
LEVER LOCK, MINIATURE, TOGGLE SEALED, SOLDER LUG, SINGLE POLE, .469 MOUNTING BUSHING
INCH-POUND MS21436C
4 May 2012
SUPERSEDING MS21436B
18 October 1985
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-8834.
28°
±10°
14°
±5°
.585
MAX
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.010 for decimals and ±.5° for angles.
4. For hardware detail specification, see appendix of MIL-DTL-8834.
FIGURE 1. Switches with .469 inch mounting bushing.
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business