MS21355K
REQUIREMENTS:
For hardware detail specifications, see appendix of MIL-DTL-8834.
In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence.
Referenced Government documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
Dielectric withstanding voltage: For center on circuits, DWV shall be 1,200 V rms at sea level.
115 V ac 60 hertz electrical endurance tests are to be performed at room temperature and pressure. Switches shall be rigidly mounted by their normal means on a rigid metal panel and subjected to shock test,
method 207 of MIL-STD-202. The switch shall be electrically and mechanically operative at the conclusion of the test and there shall be no mechanical transfer during the test.
Terminals: Gold plated.
Suitable for mounting on panels. .062 inches (1.57 mm) maximum thickness. Weight: .0143 pound maximum (6.5 grams).
Strength of terminals: 5 pounds normal to the mounting plane and 1 pound in other planes. Altitude: 50,000 feet.
Strength of actuator: Lever pivot and lever stop 6 pounds.
Terminals need not be marked. Terminal identification is shown for reference purposes only.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business