INCH-POUND MS21353K
5 May 2008
MS21353J
18 October 1985
DETAIL SPECIFICATION SHEET
SWITCH, TOGGLE, POSITIVE BREAK, SPECIAL CIRCUIT, MINIATURE, TOGGLE SEALED, SOLDER LUG, DOUBLE POLE, .469 MOUNTING BUSHING
This specification sheet is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-5423.
Notes
1. Dimensions are in inches. Metric equivalents are given for general information only.
2. Unless otherwise specified, tolerances are ± 0.10 (0.25 mm) on decimals and ±.5° on angles.
3. For hardware detail specifications see appendix of MIL-DTL-8834.
4. In the event of conflict between the text of this standard and the references cited herein, the text of this specification sheet shall take precedence.
FIGURE 1. Dimensions and configuration.
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business