MS21347K
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.04 |
1.02 |
.27 |
6.86 |
.480 |
12.19 |
.012 |
0.30 |
.047 |
1.19 |
.430 |
10.32 |
.670 |
17.02 |
.025 |
0.64 |
.072 |
1.83 |
.432 |
10.97 |
.687 |
17.45 |
.030 |
0.76 |
.16 |
4.04 |
.438 |
11.13 |
.983 |
24.97 |
.032 |
0.81 |
.240 |
6.10 |
.469 |
11.91 |
1.260 |
32.00 |
NOTES:
1. Dimensions in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.010 (0.25 mm) on decimals and ±.5° on angles.
4. For hardware detail specifications, see appendix of MIL-DTL-8834.
5. In the event of a conflict between the text of this standard and the references cited herein, the text of this standard shall take precedence.
6. Dielectric withstanding voltage: For center on circuit's, DMW shall be 1,200 V rms at sea level.
7. The switch shall be electrically and mechanically operative at the conclusion of the shock test with 2,000 foot pounds except there can be transfer of the contact mechanism at all levels when tested in accordance with MIL- STD-202, method 207.
8. Part number shall consist of MS number, (locking combination letter when lever-lock is required) and dash number.
9. Example part numbers:
MS21347-711: Toggle sealed, on-off-on, miniature.
MS21347-A711: Toggle sealed, locked in three positions on-off-on.
10.Altitude: 50,000- feet.
11. 115 V ac 60 hertz electrical endurance tests are to be performed at room temperature and pressure.
12. Maximum weight: .062 pound maximum (28.1 grams) miniature toggle.
.0797 pound (36.2 grams) lever lock.
13. Unlocking force: 4 ±1 pound.
14. Terminals shall adequately accept a wire contact within dimensional limits of SAE-AS39029/1-101.
15. The sealing grommet shall seal on smooth wire insulations of .040 (1.02 mm) to .083 (2.11 mm) diameter.
16. Plug, grommet sealing, electrical connector in accordance with MS27488-20.
17. Tool contact, insertion-extraction, electrical connector in accordance with M81969/14-10.
18. The terminal sealing grommet shall be color coded red to indicate contact size.
FIGURE 2. Locking and momentary configuration.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business