MS21346 Switch, Toggle, Positive Break, Lever Lock And Toggle, Miniature, Toggle Sealed, Integrated Wire Terminals, Single Pole, .469 Mounting Bushing

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

MS21346F

TABLE I. Detail requirements. 1/ 2/

MS dash no.	Locking comb.	Circuit made between terminals as indicated with the toggle lever in these positions: 3/			Current capacity in amperes						Life low current level switching 5 mV
					Resistive load			Inductive load
		Opposite keyway side 5/	Center positions	Keyway side 5/	28 V dc	115 Volts		28 V dc	115 Volts
						60 Hertz ac	400 Hertz ac		60 Hertz ac	400 Hertz ac
-211	A, B, C, D, E	ON 2-3	OFF	ON 1-2	5	2	3	1 4/	1	2	25 µA 5/
-221	C, E		NONE	OFF
-231				ON 1-2
-241	J, B		OFF	NONE
-271	F, H	MOM-ON 2-3	OFF	MOM-ON 1-2
-281	K	NONE
-311	G, K, L	ON 2-3
-321 7/ 8/	L	NONE	ON 2-3

1/ For lever lock, part number shall consist of MS number, locking combination letter and dash number;

example part number: MS21346-B211 - Toggle sealed, on-off-on. Locked in center position.

2/ Without lever lock, part number shall consist of MS number and dash number. Example part number: MS21346-211-Toggle sealed on-off-on.

3/ Direction of movement of internal mechanism is opposite to the direction of the toggle movement.

4/ With time constant of .020 ± .002 seconds.

5/ Contact resistance not to exceed 50 ohms during life, low current level switching.

6/ Nonfunctional terminals shall not be supplied.

7/ Dielectric withstanding voltage: 1,200 V rms at sea level (center on circuits).

8/ Delayed action of the switch toggle lever may cause circuit to close on open before snap action mechanism trips.