MS18150K
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inche |
mm |
s |
|||||||||||
.024 |
0.61 |
.067 |
1.70 |
.225 |
5.72 |
.235 |
5.97 |
.266 |
6.76 |
.408 |
10.36 |
.034 |
0.86 |
.16 |
4.1 |
.228 |
5.79 |
.250 |
6.35 |
.28 |
7.1 |
.480 |
12.19 |
.055 |
1.40 |
.19 |
4.8 |
.229 |
5.82 |
.252 |
6.40 |
.33 |
8.4 |
.688 |
17.48 |
.057 |
1.45 |
.213 |
5.41 |
.230 |
5.84 |
.258 |
6.55 |
.388 |
9.86 |
.705 |
17.91 |
.060 |
1.52 |
.223 |
5.66 |
.234 |
5.94 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ± .005 (0.13 mm) for three place decimals and ± .02 (0.5 mm) for two place decimals.
4. For hardware detail specifications, see appendix of MIL-DTL-83731.
5. Contour of switch optional provided maximum dimensions specified are not exceeded.
6. Referenced documents shall be of the issue in effect on date of invitation for bid.
7. For design feature purposes, this military specification takes precedence over acquisition documents referenced herein.
FIGURE 1. Dimensions and configuration - Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business