MIL-S-8805/85E
|
PIN |
A Max |
B Max |
Max weight with leads (Pounds) |
Operating torque (Inch-pounds) |
M8805/85-001 |
1.03 |
1.03 |
.47 |
1 |
M8805/85-002 |
1.30 |
1.53 |
.88 |
3 |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
0.005 |
0.13 |
0.062 |
1.57 |
0.248 |
6.30 |
0.620 |
15.75 |
2.000 |
50.80 |
0.010 |
0.25 |
0.080 |
2.03 |
0.250 |
6.35 |
0.765 |
19.43 |
72.000 |
1828.80 |
0.018 |
0.46 |
0.090 |
2.29 |
0.340 |
8.64 |
1.000 |
25.40 |
||
0.030 |
0.76 |
0.120 |
3.05 |
0.375 |
9.52 |
1.240 |
31.50 |
||
0.047 |
1.19 |
0.140 |
3.56 |
0.560 |
14.22 |
1.300 |
33.02 |
||
0.050 |
1.27 |
0.178 |
4.52 |
0.590 |
14.99 |
1.530 |
38.86 |
NOTES:
1. Dimensions are in inches. Metric equivalents are given for general information only.
2. Unless otherwise specified, tolerances are ±.03 (0.76 mm) for one place decimals, ±.015 (0.38 mm) for two place decimals, and ±.010 (0.25 mm) for three place decimals.
3. Configuration optional provided specified dimensions are not exceeded.
4. Lead wire shall be marked at intervals of 3.5 inches (88.9 mm) maximum with switch circuit identification number followed by wire gauge number (1-20). The marking shall be legible, permanent, and shall not impair the wire characteristics.
FIGURE 1. Dimensions and configurations - Continued.
FIGURE 2. Circuit diagram. REQUIREMENTS:
Dimensions and configuration: See figures 1 and 2.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business