MIL-S -8805/59D
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.020.
4. Actuator configuration optional within the specified envelope dimensions.
5. Functionally equivalent mounting hardware, as approved by the qualifying activity, may be provided.
REQUIREMENTS:
FIGURE 1. Dimensions and configuration - Continued
Dimensions and configuration: See figure 1. The switch actuator shall accommodate basic sensitive switches M8805/1-008.
Enclosure design: 1 (unsealed).
Temperature characteristic: 1 (-55°C to +85°C). Shock type: M (100 g's).
Sinusoidal vibration: 10 to 55 Hz in accordance with MIL-STD-202, method 201. Weight: 0.07 pound maximum.
Operating characteristics with switch installed:
Actuating force: 12.5 ±2.5 ounces. Pretravel: .188 inch maximum. Overtravel: .500 inch minimum.
Full overtravel force: 2 pounds maximum. Spring force: 2 pounds minimum.
Salt spray: Method 101 of MIL-STD-202, test condition B (48 hours). Mechanical endurance: 50,000 cycles.
Qualification: The actuator shall be tested to the requirements of this specification sheet only with
M8805/1-008 switch installed. Quality conformance:
Group A inspection: The materials and physical dimension requirements may be verified through in- process controls and inspections.
Group B inspection: Not applicable.
Part or Identifying Number (PIN): AN3169-1.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business