MIL-S-8805/51D
Inches .005 |
mm 0.13 |
Inches .193 |
mm 4.90 |
Inches .655 |
mm 16.64 |
Inches 1.218 |
mm 30.94 |
.010 |
0.25 |
.250 |
6.35 |
.734 |
18.64 |
1.250 |
31.75 |
.015 |
0.38 |
.375 |
9.53 |
.805 |
20.45 |
1.450 |
36.83 |
.031 |
0.79 |
.422 |
10.72 |
.843 |
21.41 |
1.563 |
39.70 |
.047 |
1.19 |
.554 |
14.07 |
.875 |
22.23 |
1.875 |
47.63 |
.080 |
2.03 |
.562 |
14.27 |
.937 |
23.80 |
2.500 |
63.50 |
.094 |
2.39 |
.575 |
14.61 |
1.031 |
26.19 |
3.094 |
78.59 |
.098 |
2.49 |
.625 |
15.88 |
1.125 |
28.58 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .015 (0.38 mm), except ±.005 (.127 mm) for ferrule and seal gland.
4. The "A" pin shall be permanently indicated with a circle.
5. One hole on small end of gland shall be permanently marked with a circle, to be mounted on "A" pin.
6. The circuit and the terminal arrangement shall be marked on the switch case.
7. The dimensions of the electrical conduit coupling nut shall be in accordance with AN3054-8 or equivalent. Alternative base metals and protective finishes, as approved by the qualifying activity, may be used.
FIGURE 1. Dimensions and configuration - Continued
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business