REQUIREMENTS:
MIL-S-24317/8C
Dimensions and configuration: See figures and tables.
Complete multistation switch assembly shall consist of:
1. Multistation matrix frame (Figure 1 and table IV).
2. Plug-in switch/indicator module in accordance with MIL-PRF-22885/80, when specified in contract or purchase order.
3. Insertable crimp type terminals (figure 4), when specified in contract or purchase order.
4. 4 lamps per station (T-1-3/4 midget flange base incandescent) when specified in contract or purchase order.
Matrix frame: Include terminal block and fasteners.
EMI/RFI shielding: Grounded lens screen shall be provided. Screen to mounting surface resistance shall not exceed 3 ohms. EMI screen is not grounded during switch travel or in the depressed position.
Plug-in switch/indicator module: Includes Switch (except indicator modules), lamp housing, lens assembly (in accordance with MIL-PRF-22885/82) and RFI screen.
Electrical: See table I
TABLE I: Electrical ratings.
Load |
Sea level |
|
28 V dc (amperes) |
115 V ac (amperes) |
|
Resistive Inductive |
5.0 2.5 |
5.0 2.5 |
Operating force: 4 pounds maximum.
Lens face: Shall appear white in the unlighted condition. In the lighted condition, it shall appear in a color determined by the color filter.
Lens and color filter material: In accordance with MIL-PRF-22885/82.
Colors and photometric brightness: In accordance with table III and MIL-PRF-22885. Solderability: Not applicable.
Lamp retention: Applicable. Shock: Method II (high impact).
Torque strength of plunger: Not applicable.
Seal: Drippoof.
Contact resistance: Not applicable after electrical endurance, inductive load dc.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business