MIL-PRF-83504/12B
NOTES
1. Dimensions are in inches. Metric equivalents are given for information only.
2. Each switch station is shown in the "ON" position.
3. Each switch position shall be numbered as shown.
4. Exact shape of switch is optional, provided outline dimensions are not exceeded.
5. Design of terminals and standoffs are optional
REQUIREMENTS:
Material:
Body and slide actuator: Molded plastic.
Terminals: solderable.
Terminal sealing and solderability: The terminal potting material meniscus may extend to .030 inch
maximum beyond the solder standoff.
Dimensions and configuration: See figure 1.
Seal: Sealed base. Temporary tape top seal.
Switch position and setting identification: See figure 1.
Orientation: See figure 1.
Operating force: 2.5 to 32 ounces.
Electrical ratings:
10 mA maximum at 50 mV, switching (resistive load)
100 mA maximum at 6 V dc, switching (resistive load)
25 mA maximum at 24 V dc, switching (resistive load).
Application note: In applications where the switch will mate with sockets or with panel boards, the user
should consider the compatibility of the mating terminals with respect to finished and mechanical
configurations.
Part or Identifying Number (PIN): M83504/12- (and dash number from table I).
TABLE I. Dash numbers and characteristics
Number
2
3
4
5
6
7
8
9
10
11
12
of poles
Dash
002
003
004
005
006
007
008
009
010
011
012
number
2