MIL-DTL-9395/8E
REQUIREMENTS:
Dimensions, weight, and electrical schematic: See figure 1.
Calibration: See tables I, II, III, and IV.
Proof pressure: 120 lbf/in2.
System pressure: 60 lbf/in2.
Burst pressure: 180 lbf/in2.
Electrical ratings:
Operating voltage: 28 Vdc.
Current rating: 10 amperes resistive.
Seal:
Electrical chamber: Hermetic.
Pressure chamber: Watertight.
Reference chamber: Unsealed.
Electrical connector: See figure 1.
Pressure port: See figure 1.
Media: Dry air; nitrogen; fuel IAW MIL-DTL-5624; including oil IAW MIL-PRF-7808; or hydraulic fluid
IAW MIL-PRF-6083.
High temperature (operating and nonoperating): B (except +250°F).
Low temperature (operating and nonoperating): D (-65°F).
Altitude: C (except 80,000 feet).
Shock: C (100 G).
Vibration: S (test condition C, method 204 of MIL-STD-202 except 10 - 2,000 Hz, 10 G).
Life (mechanical): F (50,000 cycles).
Life (electrical): C (50,000 cycles).
Acceleration: C (8 G).
Pulsation amplitude: A (0 percent).
Pulsation frequency: A (0 Hz).
Pressure rise: A (less than 100 lbf/in2/sec).
Dielectric withstanding voltage (at reduced barometric pressure): Applicable.
Connector torque: Applicable.
QUALIFICATION:
Single submission: Restricted to switch submitted.
Group submission: See table V.
2