MIL-DTL-9395/1D
REQUIREMENTS:
Dimensions, configuration, and electrical schematic: See figure.
Weight: 0.5 pound maximum.
Calibration: See table I.
Tolerance: See table I.
Proof pressure: 4,500 psig.
System pressure: 3,100 psig.
Burst pressure: 7,500 psig.
Electrical ratings:
Operating voltage: 18 to 30 V dc.
Current rating: 3 amperes resistive.
1 ampere inductive, L/R ratio .026
Seal:
Electrical chamber: Unsealed.
Pressure chamber: Water tight.
Reference chamber: Unsealed.
Media: Hydraulic fluid MIL-PRF-6083.
High temperature:
Operating - B (275°F).
Nonoperating - C (350°F).
Altitude: C (70,000 feet).
Shock: C (100 G).
Vibration: S (test condition D, method 204 of MIL-STD-202 except 10-2,000 Hz, 20 G).
Life mechanical: A (100,000 cycles).
Life electrical: (50,000 cycles).
Acceleration: C (8 G).
Pulsation amplitude: E (10 percent).
Pulsation frequency: D (500 ±50 Hz).
Pressure surge: F (500,000 psi/sec).
Dielectric withstanding voltage (at reduced barometric pressure): Applicable.
Connector torque: Applicable.
Dynamic (moving) seals such as piston with O rings are not acceptable.
The unit shall be factory set with no external means of adjustment.
2