INCH-POUND
MIL-DTL-5423/7G
17 February 2009
SUPERSEDING
MIL-DTL-5423/7F
4 February 2008
DETAIL SPECIFICATION SHEET
BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES),
STYLE 2 (ONE HOLE MOUNTING, DRILLED PANEL),
STYLE 2S (RFI-SHIELDED, ONE HOLE MOUNTING, DRILLED PANEL)
This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5423.
Dimensions
Size
A
B (min)
C
D
E
1
.547 (13.89)
.281 (7.14)
15/32-32 UNS-2B
.422(10.72)
.625(15.88)
2
.719 (18.26)
.438 (11.13)
15/32-32 UNS-2B
.422(10.72)
.625(15.88)
3
.547 (13.89)
281 (7.14)
1 / 2-32 UN-2B
.422(10.72)
.625(15.88)
4
.609 (15.47)
281 (7.14)
5/8-24 UNEF-2B
.516(13.11)
.750(19.05)
5
.547 (13.89)
.138 (4.78)
1 / 2-32 UN-2B
.422(10.72)
.625(15.88)
NOTES:
1.
Dimensions are in inches.
2.
Millimeters are in parentheses.
3.
Metric equivalents are given for general information only and are based upon 1 inch = 25.4 mm.
4.
Unless otherwise specified, tolerances are ±.015 (.38 mm).
5.
Monel in accordance with QQ-N-281, class A or equivalent.
FIGURE 1. Dimensions and configuration boots type B, style 2 and style 2S.
AMSC N/A
FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business