INCH-POUND
MIL-DTL-5423/2F
17 February 2009
SUPERSEDING
MIL-B-5423/2E
4 February 2008
DETAIL SPECIFICATION SHEET
BOOT, DUST AND WATER SEAL, TYPE A (FOR TOGGLE SWITCHES),
STYLE 3 (ONE HOLE MOUNTING, THROUGH)
This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5423.
Inches
mm
Inches
mm
.005
0.13
.160
4.06
.010
0.25
.240
5.10
.115
0.38
.469
11.91
.020
0.51
.550
13.97
.115
2.92
.625
15.88
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only and are based upon 1 inch = 25.4 mm.
3. Unless otherwise specified, tolerances are ±.015 (0.38 mm).
4. Opening shall pass over a .240 pin without rupturing or tearing and fit snugly over a .115 diameter pin. Inner
portion of opening shall be treated with transparent lubricant.
FIGURE 1. Dimensions and configuration boot type A, style 3.
AMSC N/A
FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business