MIL-DTL-21604/6C
REQUIREMENTS:
Dimensions and configuration: See figure 1, figure 2, and table I.
Angle of throw: 45 degrees.
Switching action: Detent.
Electrical loads:
AC current: 10 amperes.
Voltage: 125 volts (at 60 - 400 Hz, 0.80 inductive power factor).
Temperature rise: 30C maximum.
Contact material:
Rotor: Silver-overlay phosphor-bronze.
Stator: Silver-overlay copper.
Barriers: See figure 1.
Terminal marking: See figure 1.
Stop marking: See figure 1.
Qualification samples: See table II.
TABLE I. Type designation and switching characteristics.
Maximum
Total number
Type designation
Dimensions 2/
Approx.
No. of
Rotational
of sections
weight
switch
Style
A
Rotor
torque
including
B
Component
.06 (1.57)
(ounces)
sections
designation
(inch-pounds)
control sections
33-40
66
12.06(306.37)
12.56(319.07)
27
25
RJR
1
S
+0.14 (3.58)
39-46
66
12.56(319.07)
27
25
RJR
2
S
12.06(306.37)
+0.14 (3.58)
34-41
66
12.56(319.07)
27
25
RJR
3
S
12.06(306.37)
+0.14 (3.58)
43-50
66
12.56(319.07)
27
25
RJR
4
S
12.06(306.37)
+0.14 (3.58)
39-46
66
12.56(319.07)
27
26
RJRA
2
S
12.06(306.37)
+0.14 (3.58)
1/ For rotor designation, see figure 2.
2/ Dimensions are in inches. Metric equivalents (to the nearest 0.01 mm) are given for general information only and are
based upon 1 inch = 25.4 mm.
5