MIL-DTL-21604/3D
REQUIREMENTS:
Dimensions and configuration: See figure 1, figure 2, and table I.
Angle of throw: 45 degrees.
Switching action: Detent.
Electrical loads:
AC current: 5 ampere.
Voltage: 125 volts (at 60 and 400 Hz, 0.80 inductive power factor).
Temperature rise: 15C maximum.
Contact material:
Rotor: Silver-overlay phosphor bronze.
Stator: Silver-overlay copper.
Stop torque: 30 inch-pounds.
Barriers: See figure 1.
Terminal marking: Adjacent to terminals on switch section.
Stop marking: See figure 1.
Qualification samples: See table II.
TABLE I. Type designation and switching characteristics.
Maximum
Type designation
Dimension
Approximate
Number of
rotational
"X" 2/
weight
Style
Rotor
sections
torque
Component
.062 (1.57)
(ounces)
designation 1/
(inch-pounds)
S
2
JL
3
1.91 ( 48.41)
8
9
S
2
JL
5
2.66 ( 67.46)
10
11
S
2
JL
10
5.28 (134.14)
16
16
S
3
JL
3
1.91 ( 48.41)
8
9
S
3
JL
5
2.66 ( 67.46)
10
11
S
3
JL
10
5.28 (134.14)
16
16
S
4
JL
3
1.91 ( 48.41)
8
9
S
4
JL
5
2.66 ( 67.46)
10
15
S
4
JL
10
5.28 (134.14)
16
20
1/ For rotor designation, see figure 2.
2/ Dimensions are in inches. Metric equivalents (to the nearest 0.01 mm) are given for general
information only and are based upon 1 inch = 25.4 mm.
5