MIL-DTL-18396E
1.2.3 Switch handles. Operating handles will be of the following shapes, as specified (see 6.2.1):
(a)
Round (plain).
(b)
Round (knurled).
(c)
Oval.
(d)
Pistol grip or lever.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section
does not include documents cited in other sections of this specification or recommended for additional information or
as examples. While every effort has been made to ensure the completeness of this list, document users are
cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part
of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
-
Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment and Systems,
Requirements for.
-
Electrical Power Equipment, Basic Requirements for (Naval Shipboard Use).
-
Plates, Identification.
DEPARTMENT OF DEFENSE STANDARDS
-
Identification Marking of U.S. Military Property.
-
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II -
Internally Excited)
-
Test Methods for Electronic and Electrical Component Parts.
Marking of Electrical and Electronic Parts.
Technical Data Packages
DEPARTMENT OF DEFENSE HANDBOOKS
-
General Guidelines for Electronic Equipment
(Copies of these documents are available online at https://quicksearch.dla.mil/ or https://assist.dla.mil/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
-
Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
Molding Compounds, Thermosetting, Standard Specification for.
(Copies of these documents are available online at https://www.astm.org or from the American Society for Testing
and Materials, 100 Barr Harbor Drive, West Conshohocken, Pennsylvania, 19428-2959.)
3.
REQUIREMENTS
3.1 First article. When specified in the contract or purchase order, a sample shall be subjected to first article
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business