MIL-DTL-15291/8B
REQUIREMENTS:
Applicable specification: MIL-DTL-15291.
Dimensions and mounting: See figures 1 through 3.
Switching characteristics: See table I.
Angle of throw: 90 degrees.
Switching action: Snap action, reciprocating.
Electrical and endurance ratings: See table II.
Stop strength (applicable to switches with stops): 100 inch-pounds.
Vibration: 50 Hz, MIL-STD-167-1.
Shock: High impact, MIL-S-901.
Contact resistance: 0.005 ohms maximum.
Dielectric withstanding voltage: 2,000 V rms.
Insulation resistance: 200 megohms minimum.
Temperature rise: 50°C maximum.
Mounting bolts: (2), 2/8 diameter, length, and headstyle to suit application. Bolts not furnished.
Handle: M15291/9-100.
Terminal marking: Terminal marking shall be in accordance with details A through G, as specified in
table I. Terminal markings in table I are shown as viewed from the front (handle end) of the switch.
TABLE II. Electrical and endurance ratings.
Electrical
De-energized
Test rate
Current
Voltage
operations
operations
Tests
(operations
(amperes)
(volts)
(number of
(number of
per minute)
operations)
operations)
Alternating current (rms)
60
500
6,000
10
4,000
Direct current
60
250
4,000
5
---
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business