MIL-DTL-13623/1B
NOTES:
1. Switch Types:
Type I (Single Pole, Single Throw) Class I.
Type II (Single Pole, Multi-Throw) Class I.
Type III (Multi-Pole, Single Throw) Class I.
Type IV (Multi-Pole, Multi-Throw) Class I.
2. Contact rating (at 28 Volts): 10 Amp Resistive Load; 10 Amp Inductive Load; 5 Amp Lamp Load.
3. Flats shall be as shown when the switch lever is in position 1.
4. Plain connectors mate with MS27144-1 and MS27144-2. Ribbed connectors mate with
MS27144-3. Dummy connectors (8338561 with 7982907) not supplied as part of switch.
5. Lever shall not be supplied as part of switch. Lever used will be determined by vehicle application.
For information and reference only see drawing 5381088, 10896915 and 10938483.
6. Dimensions are in inches. Unless otherwise specified, tolerances are .02 on decimals and + 2
on angles.
7. For design feature purposes, this specification sheet takes precedence over procurement
documents referenced herein.
8. Referenced documents shall be of the issue cited in the solicitation or contract.
9. This standard is not intended to limit construction to features other than as shown hereon by
dimensions, notations and referenced documents.
10. The part or identifying number consists of the specification sheet number plus a dash number.
Example: MIL-DTL-13623/1-2.
11. Marking shall consist of the part of identifying number and the manufacturer's identification in
accordance with MIL-STD-130. Identification marking of terminals A, B, C and D shall be adjacent
to the terminals.
Reference Documents:
MIL-DTL-13623
MIL-STD-130
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate
where modifications from this amendment were made. This was done as a convenience only and the
Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and
contractors are cautioned to evaluate the requirements of this document based on the entire content
irrespective of the marginal notations.
Custodians:
Preparing activity:
Army AT
DLA CC
DLA CC
(Project 5930-2009-030)
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.daps.dla.mil/ .
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business