MIL-PRF-83504/4E
REQUIREMENTS:
Material:
Body and actuator rocker: Molded plastic.
Terminals: Plug-in or solderable. See tables I and II. The solderable terminals shall be equivalent
to or better than solder over nickel over copper over brass. Both plug-in and solderable must meet
solderability requirements.
Terminal sealing and solderability: The terminal potting material meniscus may extend to .030 inch
maximum beyond the solder standoff.
Dimensions and configuration: See figures 1 and 2 and tables I and II.
Seal: Sealed base. Temporary tape top seal.
Switch position and setting identification: See figures 1 and 2.
Orientation: See figures 1 and 2.
Operating force: 2.5 to 32 ounces.
Electrical ratings:
10 mA maximum at 50 mV, switching (resistive load)
100 mA maximum at 6 V dc, switching (resistive load)
25 mA maximum at 24 V dc, switching (resistive load).
Application note: In applications where the switch will mate with sockets or with panel boards, the user
should consider the compatibility of the mating terminals with respect to finished and mechanical
configurations.
4