INCH-POUND MS27718H
3 March 2011
SUPERSEDING MS27718G
15 March 2010
DETAIL SPECIFICATION SHEET
SWITCH, TOGGLE, MINIATURE SINGLE POLE, TOGGLE SEAL
This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and
the latest issue of MIL-DTL-83731.
SHOULDER OPTIONAL
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.030 |
0.76 |
.072 |
1.83 |
.26 |
6.6 |
.535 |
13.59 |
.04 |
1.02 |
.10 |
2.5 |
.468 |
11.89 |
.575 |
14.61 |
.062 |
1.57 |
.175 |
4.45 |
.47 |
11.9 |
.690 |
16.26 |
.07 |
1.78 |
.240 |
6.10 |
.51 |
13.0 |
.740 |
18.80 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ± .020 (0.51 mm) on two place decimals and ± .005 (0.13 mm) on three place decimals.
4. For hardware detail specification, see supplement of MIL-DTL-83731.
5. Configuration of switch case is optional provided maximum dimensions specified are not exceeded.
FIGURE 1. Dimensions and configurations
AMSC N/A FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business