INCH-POUND
MIL-PRF-8805/90G
27 March 2007
SUPERSEDING
MIL-PRF-8805/90F
4 October 2004
PERFORMANCE SPECIFICATION SHEET
SWITCH, SENSITIVE, LOW FORCE, SPDT, 10 AMPERES, UNSEALED
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The complete requirements for acquiring the switches described herein shall consist of this specification
and the latest issue of MIL-PRF-8805.
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.001
0.03
.110
2.79
.415
10.54
.796
20.22
.002
0.05
.114
2.90
.578
14.68
.875
22.23
.003
0.08
.126
3.20
.625
15.88
1.094
27.79
.005
0.13
.165
4.19
.640
16.26
1.406
35.71
.010
0.25
.406
10.31
.791
20.09
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±.015 inch (0.38 mm).
3. Exact shape of switch optional provided dimensions specified are not exceeded.
4. Mark, stamp, or mold NO, NC, and COM. terminal designation on either side of switch.
5. Metric equivalents are given for general information only.
6. Mounting holes shall accept .112 (2.82 mm) maximum diameter pins or screws.
7. Alternative base metals and protective finishes, as approved by the qualifying activity,
may be utilized for terminal screws and lock washer material. Dimensions shall be in
accordance with the referenced hardware specifications.
FIGURE 1. Configuration and dimensions.
AMSC N/A
FSC 5930