INCH-POUND
MIL-PRF-8805/39J
1 July 2014
SUPERSEDING
MIL-PRF-8805/39H
6 December 2012
PERFORMANCE SPECIFICATION SHEET
SWITCHES, SENSITIVE, LIMIT, PLUNGER, 7 AMPERES, RESILIENT SEAL, FLUID RESISTANT
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the switches described herein shall consist of this specification
and the latest issue of MIL-PRF-8805.
NASM 35333-138
Inches
mm
Inches
mm
NOTES:
.003
0.08
.250
6.35
.004
0.10
.584
14.83
1.
Dimensions are in inches.
.030
0.76
.625
15.88
2.
Metric equivalents are given for general information only.
.038
0.97
1.000
25.40
Unless otherwise stated, tolerance is ±.010 (0.25 mm).
3.
.072
1.83
1.375
34.93
4.
Contour optional, provided maximum dimensions specified
.125
3.18
2.0
50.
are not exceeded.
72.0
1828.
5. Leads shall be marked with the switch circuit identification
number followed by wire gauge number (1-20, 2-20, etc.).
6. Alternative base metals and protective finishes, as approved by the qualifying activity, may be utilized
for hexagon nut, lock washer and keyway washer material. Dimensions shall be in accordance with
the referenced hardware specifications.
FIGURE 1. Dimensions and configurations.
AMSC N/A
FSC 5930
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business