MIL-DTL-13484 Switch, Sensitive: 30 Volts Direct Current Maximum, WaterproofThis specification covers a waterproof, single-pole, sensitive switch used for controlling electrical circuits up to 30 volts direct current in tactical military vehicles.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

METRIC

MIL-DTL-13484G

26 January 2011

SUPERSEDING

MIL-DTL-13484F

30 November 2004

DETAIL SPECIFICATION

SWITCH, SENSITIVE: 30 VOLTS

DIRECT CURRENT MAXIMUM, WATERPROOF

Inactive for new design after 8 March 1999

This specification is approved for use by all Departments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers a waterproof, single-pole, sensitive switch used for controlling

electrical circuits up to 30 volts direct current in tactical military vehicles.

1.2 Classification. The switch is classified as follows (see 6.2 and 6.7):

Type I

Single-throw

Type II

Double-throw

Class 1

Normally open

Class 2

Normally closed

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements of

documents in section 3, 4, or 5 of this specification, whether or not they are listed.

Comments, suggestions or questions on this document should be addressed to DLA Land and Maritime, ATTN: VAT,

Post Office Box 3990, Columbus, OH 43218-3990, or emailed to switch@dla.mil. Since contact information can

change, you may want to verify the currency of this address information using the ASSIST Online database at

AMSC N/A

FSC 5930